Shipping Info

24 Hour Shipping available via DPD Local Free Shipping on small item orders over £75 via Royal Mail 2nd Class Small Parcel Service to inland UK post codes.

24 Hour Shipping available via DPD Local

Free Shipping on small item orders over £75 via Royal Mail 2nd Class Small Parcel Service to inland UK post codes.

Jeti Central Box 200 with 2 x Rsat2 plus RCSW

Jeti Central Box 200 with 2 x Rsat2 plus RCSW

£272.64 Inc VAT

Add to Cart:

Details

  • 2 Units in Stock
  • Manufactured by: JETI Model



Description

The Central Box 200 plus 2 x Rsat2 plus RCSW

is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage two batteries and fully supports the JETI EX telemetry system. Up to three receivers with serial EX Bus output (2 x 2.4MHz and 1 x 900MHz) can be connected to the Central Box. With JETI DC/DS transmitter, the full potential of the Central Box can be used, such as an easy way to configure the Central Box, EX telemetry, and very fast servo response.

Please note it is not possible to connect anything other than Receivers for input signal to the RX1 and RX2 and RX 3 (EXT) ports of the CB200 these receivers are powered directly from the Central box. It is not recommended to connect anything to the receivers connected to these ports as each port is limited to 200mA. If you try and connect servos/ECu's or light control circuits to the receivers you will damage the CB200 which is then not covered under warranty.

Central Box 200 supports up to 15 protected servo outputs, two battery inputs and incorporates possibility to connect an RC or magnetic switch. If connecting a third receiver to the EXT/3RX port you will need to use either pin 14 or 15 for Sensors

This Central box 200 +2 x Rsat2 + RCSW includes the Radio control switch

If you wish to use regulated power suplies ideally you will need two regulators between the power supplies and the CB200 to maintain dual diversity up to 2 LIxxx cells we reccomnend the Jeti Max Bec amd for power supplies of more than 2 LIxxx up to 50v the Jeti SBec, or maybe think about using a Jeti CB400 with 2 x intregrial BEC system

Attributes

Overload protection on each channel
Possibility to connect up to 3 receivers with serial interface (2 x 2.4MHz and 1 x 900Mhz EX Bus)

Built-in Expander function for up to 3 sensors
Input for magnetic switch or RC switch
MPX battery input connectors: 2x
100Hz mode of servo outputs (10ms period)
Supports EX telemetry (voltage, current, capacity, and temperature measurement, overload indication
Easy settings changes via DC/DS transmitter
Firmware updates by user
Suitable for use with high voltage (HV) servos
Compact size for easy installation
Each output is individually configurable (channel assignment, trim, reverse, ATV)

Specification

Weight [g] 30
Dimensions [mm] 63 x 38 x 17
Sustained current [A] 15
Number of channels 15
Telemetry Yes
Operational temperature [°C] -20 ... 75
Compatible protocols EX Bus, PPM
Supply Voltage [V] 4 ... 14
Satellite receiver support Yes
Batteries NiXX 4 ... 10
Batteries LiXX 2 ... 3
Idle current [µA] 120
Number of battery inputs 2
Voltage stabilisation No
Peak current (2s) [A] 90

For more information, please visit this products webpage.






Cards Accepted

 
 
 

Go Green

We can now help you recycle your old electronics, click the logo for more details.

We can now help you recycle your old electronics, click the logo for more details.